American ExpressVisaMasterCard

Tovar Industries, Inc.
1135 San Felipe Road, Hollister, CA 95023

Phone: 831-634-2970 • Fax: 831-634-2977 •
Hours: Monday – Friday, 7 a.m. – 4 p.m. PST

Home | Clean Room Benches | Custom Cabinets | Custom Shelving | Custom Carts

Phone: 831-634-2970

Tovar Industries has been delivering customized Work Benches, Work Stations, Tables, Cabinets, Shelving and Carts for Corporate, Industrial, Medical, Biotech, Laboratory and Clean Room applications for over 45 years.
How may we help you?

Request for Quote

Contact us today for a quote or for additional information.

E-mail Address
Bold = Required Field

Welcome to Tovar Industries Inc

Tovar Industries Inc specializes in the manufacture of standard and custom-built workstations, benches, cabinets, shelving and carts for corporate, industrial, medical and clean room applications.

Our workstations are available in a wide array of finishes and can be custom built to your specifications. Custom-designed stations such as ergonomic height-adjustment systems and clean-room-approved stations with anti-static tops are available.

We do Original Equipment Manufacturer (OEM) development built to your specifications and shipping to multiple locations.

In fact, we have been providing custom workstations to companies such as Intel and IBM since 1969. If you have an idea for a workstation that would make your life easier, send us an e-mail or give us a call! Our offices are open from 7:00 a.m. to 4:00 p.m. PST, Monday through Friday. Call today to request your free estimate! We can ship anywhere in the United States!

Gibo / Kodama Chairs
T - 50SS Stainless Steel Clean Room and Much More Built to Your Specs
Dunnage Racks & Platforms Security Units, Specialty Units  

  • Stacking Basket Systems
  • Supply Carts
  • Stacking & Mobile Containers 
  • Heavy-Duty Stacking Containers
  • Storage Bins / Bin Carts
  • Hamper & Cylinder
  • Transporter Carts
  • Universal Carts
  • Stock Trucks
  • Electronic Products / Carts
  • Full-Service Carts
  • Adapta-Plus
  • Shelving
  • Shelving Storage Systems
  • Enclosure Panels
  • Dolly Bases
  • Wall Shelf Units
  • Utility and Mail Carts
  • All from Technibilt

    Cari-Trac and Cari-Stor Systems

    Custom Work Bench

    Custom Cabinet

    Custom Shelving

    Custom Cart

    ESD Properties

    The unique characteristics of Nevamar Static Dissipative Laminates make them ideally suited for a variety of electronically sensitive applications. Not only do they meet or surpass all standards for electrical properties, but they practically eliminate surface shedding. And they provide a tough, durable work surface that outlasts competitive materials.

    ESD Ground Kit


    Electrical Properties

      Typical Certified
    Volume Resistance (100V, Face to Back)1


    1 x 106 to 1 x 109

    Point to Point Resistance (100V, 18" apart)1


    1 x 106 to 1 x 109

    Decay Rate (5000 Volts Fed Test Method 101C Method 4046)2, 3 .001 Seconds Less than .05 Seconds
    Surface to Grounding Bolt (18" apart)1


    1 x 106 to 1 x 109

    1. At 50 percent RH / 72 degrees Fahrenheight, 100V with a Biddle BM 10 Megger Meter, NFPA Electrodes (2 1/2 Diameter, 5#)
    2. At 50 percent RH / 72 degrees Fahrenheight 
    3. Two Seconds Maximum Allowed


      Static Dissipative ARP SURFACE Conventional (Non-ARP)
    Typical NEMA Value

    1550 cycles

    600 cycles

    Typical Rate of Wear (Weight Loss per 100 Cycles Abrasion)

    .006 gm / 100 cycles

    .080 gm / 100 cycles

    • Laminate Performance Properties - Meets or exceeds NEMA LD-3-1991 standards for PF-42 grade.
    • Thickness - Postformable Sheet: .040" nominal Lay-Flat Table Mat: .060" nominal
    • Formability - Postformable within 1/2" to 3/4" radius depending on equipment and humidity.
    • Surface Finish - Standard textured finish.
    • Bonding Procedure - Use standard contact or white glue adhesives, and standard (NEMA) application procedures for high-pressure decorative laminates.
    • Chemical Resistance - Resistant to common solvents such as acetone, 111 trichloroethylene, soldering flux, isopropyl alcohol and naptha.
    • Temperature Resistance - 350 degrees Fahrenheit with no change per NEMA LD-3.06 and NEMA LD-3.08.
    • Maintenance - Clean static dissipative laminate with good ammoniated detergent, rinsing with clear water. Do not use wax or other coatings since they may modify the electrical properties of the laminate.
    • Installation - The laminate must be connected to a good ground to be effective.

    Check Out These Advantages: 

    • Controlled dissipation of static electricity without voltage suppression ambiguity
    • Features ARP SURFACE to minimize surface shedding
    • Meets or exceeds all normal durability requirements of NEMA LD-3-1991
    • High resistance to hot solder, soldering flux, chemicals and heat
    • Textured finish is easy to maintain
    • Postformable for rounded applications
    • Each sheet is certified and labeled to meet specific electrical property requirements

    Color / Size Availability 

    Postformable Material, Product Code 740; Thickness .040," Nominal 

          Sizes in Stock
    Finish 36" x 120" 36" x 144" 48" x 120" 48" x 144" 60" x 120" 60" x 144"
    S-2-64 Beige T X X X X X X
    S-2-65 Almond T X X X X X
    S-3-35 Blue T X X X X X X
    S-6-25 Gray T X X X X X X
    S-7-28 White T X X X X X X

     Lay-Flat Table Mat Material, Product Code 720; Balanced Construction, Thickness .060," Nominal 

          Sizes in Stock
    Finish 36" x 144" 48" x 144" 60" x 144"
    S-2-64 Beige T X X X
    S-2-65 Almond T X X
    S-3-35 Blue T X X X
    S-6-25 Gray T X X X
    S-7-28 White T X X X

    • Sheet sizes listed are nominal
    • Finish "T" indicates standard textured finish
    • 30" width available, cut at no charge, order in multiples of two
    • Also available in 96" length with a 50-sheet minimum
    ©   YP Intellectual Property LLC. All rights reserved. YP, the YP logo and all other YP marks contained herein are trademarks of YP Intellectual Property LLC and/or YP affiliated companies. All other marks contained herein are the property of their respective owners.
    Sign In